Bharatbook.com : Printed Electronic Materials device Fabrication and Integration

Inorganic and Composite Printed Electronics unique report ( http://www.bharatbook.com/Market-Research-Reports/Inorganic-and-Composite-Printed-Electronics.html ) assesses the huge opportunities for fine chemicals, printing, production equipment and electronics companies in the largest part of the emerging $300 billion printed electronics business - inorganic materials and composites. Semiconductors, dielectrics, conductors, light emitters etc for displays, photovoltaics, transistors and much more are covered. Company profiles and ten year forecasts are given.

It is often argued that the inorganic options are interim, because the progress is coming to an end whereas organics are "future proof". Nothing could be further from the truth. For conductors with vastly better conductance and cost, for the best printed batteries, for quantum dot devices and for transistor semiconductors with ten times the mobility, look to the new inorganics. That is the emerging world of new nanoparticle metal and alloy inks that are magnitudes superior in cost, conductivity and stability, such as the flexible zinc oxide based transistor semiconductors working at ten times the frequency and with best stability and life, along with many other inorganic materials. Read the world's only report that pulls all this together in readable form.
Detailed forecasts
In 2009, the amount spent on inorganic electronic components and inorganic materials for composite components will be $1.1 billion of a $1.92 billion market for all of printed electronics. Much of this is in fairly mature markets - metal flake ink used for conductors in heated windscreens, membrane keyboards and circuit boards; and disposable sensors for the multi billion glucose sensor labels sold yearly. However, also making an impact in 2009 in this figure are electrophoretic, electroluminescent and electrochromic displays, laminar batteries and thin film photovoltaics such as CIGS and CDTe devices.

In 2009 inorganic semiconductors will begin to be sold from companies such as Kovio for RFID tags, being able to perform to existing RFID tag standards thanks to much higher mobilities than organic semiconductors. We find that in 2019, of a total $57.16 billion market (which includes printed and thin film displays, logic, memory, photovoltaics, power and sensors), the amount spent on inorganic components as a whole or in composites with organics will be approximately 50.7% - $28.98 billion. This highlights the importance of inorganic printed electronics and the opportunity for companies to be involved. With over 160 tables and figures, this report critically compares the options, the trends and the emerging applications. It is the first in the world to comprehensively cover this exciting growth area. The emphasis is on technology basics, commercialisation and the key players.
Technologies covered
The report considers inorganic printed and thin film electronics for displays, lighting, semiconductors, sensors, conductors, photovoltaics, batteries and memory giving detailed company profiles not available elsewhere. The coverage is global - with companies from East Asia to Europe to America covered in this report. The full contents list is shown at the bottom of this page.

The application of the technology in relation to other types such as organic electronics and silicon chips is given, with detailed information clearly summarised in over 160 tables and figures, such as those below. The table shows the likely impact of inorganic printed and potentially printed technology to 2019 by giving the dominant chemistry by device and device element. Dark green shows where inorganic technology is extremely important for the active (non-linear) components such as semiconductors. Light green shows important contributions from hybrid inorganic-organic technology. Red shows where organic technology has the greatest potential over inorganic.

Elements being targeted
In order to meet the widening variety of needs for printed and potentially printed electronics, not least in flexible, low cost form, a rapidly increasing number of elements are being brought to bear as illustrated below. Oxides, amorphous mixtures and alloys are particularly in evidence. Even the so-called organic devices such as OLEDs variously employ such materials as B, Al and Ti oxides and nitrides as barrier layers against water and oxygen, Al, Cu, Ag and indium tin oxide as conductors, Ca or Mg cathodes and CoFe nanodots, Ir and Eu in light emitting layers, for example.
Value chain dynamics studied
For some, it becomes a matter of "Shall I make the new inorganics printable?" or "Shall I make organics work better?" Not everyone is jumping the same way. Indeed there is a spectrum of choice as shown in the figure below. Here we are simplifying in calling the right side "organic" because it almost always involves metal conductors, just as the left side often involves organic substrates. The technologies live together - and that is not just an interim stage.
To know more and to buy a copy of your report feel free to visit : http://www.bharatbook.com/Market-Research-Reports/Inorganic-and-Composite-Printed-Electronics.html
http://www.bharatbook.com/Market-Research/Electronics.html
Or

Contact us at:
Bharat Book Bureau
Tel: +91 22 27578668
Fax: +91 22 27579131
Email: info@bharatbook.com
Website: www.bharatbook.com
Blog: http://bharatbookresearch.blogspot.com

http://www.bharatbook.com/Market-Research-Reports/Inorganic-and-Composite-Printed-Electronics.html
http://www.bharatbook.com/Market-Research/Electronics.html