CPR Systems Iron Phosphate Metal Pretreatment Solution - The "Green" Alternative

The CPR System's high-pressure spray wand phosphate cleaning method with recycling is an environmentally friendly, cost effective and labor reducing option for the pretreatment of metal products before liquid or powder coating. Here's why:

1.The CPR System immediately recycles the wash water chemical bath, reclaiming the chemical cleaner and phosphate for future use. The CPR System's closed-loop recycling process eliminates daily environmental monitoring because nothing is dumped down the drain. This recycling method provides chemical savings of up to 80 percent over wash and dump methods currently used by many manufacturers.

2.The Bondtite high-pressure washer is energy efficient. Providing on demand heat, the burner system activates only when the spray wand trigger is pulled and deactivates when the spray wand trigger is released. For more energy savings, the Bondtite pressure washer has a standard time delay shut-off. This will allow the Bondtite unit to power down automatically when not in use.

3.The CPR System is a labor reducing and cost effective way to speed up any production line. Using the CPR System's high-pressure spray wand method will drastically decrease the time needed to prepare large metal product for paint or powder coat. The CPR System will clean and phosphate your in production products in one step. Simple pull the trigger of the spray wand and wash the metal substrate with 180 degree phosphate solution. It is a lean, "green" process to pretreat your metal fabricated products.

4.The CPR recycling system is easy to operate and maintain. Providing consistent pretreatment results for over 20 years.

The CPR System is a "green" technology that is not only good for the environment but is good for business. CPR Systems is the leader in high-pressure spray wand phosphating with recycling. The CPR system provides the cleaning power of a 5-stage washer in one step. Designed for large metal products, the high pressure, cleaning, phosphating method with closed-looped recycling is the definition of a lean manufacturing technology.

The CPR recycling system is easy to operate and maintain. CPR Systems is the leader in high-pressure spray wand phosphating with recycling. The CPR System will clean and phosphate your in production products in one step. For more information, please visit - www.cprsystemsonline.com