http://www.articletrader.com/ Articles at ArticleTrader en-us http://www.articletrader.com/home-and-family/hobbies/using-swarovski-crystal-beads-for-making-beaded-jewellery.html http://www.articletrader.com/home-and-family/hobbies/using-swarovski-crystal-beads-for-making-beaded-jewellery.html Thu, 12 Nov 2009 09:10:44 -0600
Swarovski crystal beads have been a staple in jewellery making for over 100 years and are still as popular today as they were in Edwardian times. They're ideal for brightening up a tired piece of jewellery by simply restringing an existing necklace and interspersing Swarovski crystals throughout the pattern. All you will need to do this is your original necklace, a new length of beading thread, a beading needle, a sharp pair of scissors and a new clasp and jump rings to complete the project. You will also need a pair of flat nosed jeweller's pliers to put the clasp and links onto the ends of the necklace and of course, a selection of Swarovski crystals. Using a little care (and a tray to catch any beads that fall from the original necklace, otherwise you could spend an inordinate amount of time on your hands and knees looking for that lost bead!), destring the original piece with care. Decide how you want to re-create the necklace, incorporating the Swarovski crystals into the design and choosing crystals that correspond in colour with your original beads. Swarovski crystal beads come in a rainbow of different colours, so there should be a colour to match any necklace.

Thread your beading needle with the new beading thread and tie a knot about four to six inches in and place an ‘anchor bead' at the end of the new thread. This will prevent your beads slipping off the end as you place thread them onto the new necklace. At this point you can let your imagination take over. How you restring the necklace is entirely up to you, depending on the effect you wish to create. If you want to create a shorter, multi-stranded necklace out of a single strand of beads, remember to divide up your beads evenly before beginning. If you're not sure, try laying the design out first on a flat surface before committing the beads to your new thread. Once you have completed your first strand, remembering to intersperse your Swarovski crystals where appropriate, finish with a second anchor bead and tie off the thread.

Depending on how many beads you have available and what kind of effect you wish to create, repeat the process. Try making each strand a slightly different length from the first for a layered look to really capture the beauty of each individual bead. Once you have your re-threaded strands of beads, draw the ends of the thread through a crimp bead and make a multi-stranded loop, drawing the tail ends back through the crimp bead. Close the crimp bead to form a sealed end and trim any loose threads off with the scissors. Repeat the process with the other ends. This will give you a single, multi-stranded necklace. Attach your jump ring to one loop and the corresponding catch to the other and instantly you have a beautiful necklace recycled from an old piece of jewellery and transformed by the simple inclusion of sparkling, iridescent Swarovski crystals.

--
Adam Hunter - E-commerce Marketing Manager of cooksongold.com. Cookson Precious Metals offer a choice of jewellery making supplies from over 10,000 products including Swarovski crystal beads, jewellery tools, precious metal clay, gemstones and gold and silver sheet - gold, platinum and palladium plus technical information for jewellers, jobbers, designer, craftsmen, artisans and students.

Contacts
Adam Hunter
E-commerce Marketing Manager
Tel(DDI): +44 (0) 121 212 6491
E-mail: adam.hunter@cooksongold.com

Source: http://www.articletrader.com ]]> http://www.articletrader.com/home-and-family/hobbies/soldering-jump-rings-using-sterling-silver-solder.html http://www.articletrader.com/home-and-family/hobbies/soldering-jump-rings-using-sterling-silver-solder.html Thu, 12 Nov 2009 09:06:24 -0600 silver solder and conforms to the same hallmarking standards as the findings to be able to call your jewellery ‘sterling' silver.

Soldering is actually far easier than you may first assume. You do need to ensure that your work surface is heat resistant and that you have considered all safety issues before beginning. Make sure the area you are working in is free from clutter and well ventilated and that you have prepared your equipment before starting. A pair of safety goggles is a worthwhile investment as they protect your eyes if impurities in the silver or silver solder cause the liquid metal to ‘spit'. The easiest and most controllable heat source to work with is a butane torch, which is very similar to the kind used in kitchens. These are perfect for small jobs such as soldering jump rings. You will also need flux, a charcoal block, safety pickle and a pickle pot and tongs (copper or plastic). An optional extra, and one that can help you a great deal in particularly fiddly jobs, is what is commonly referred to as a ‘helping' or ‘third' hand. This is a tabletop tool that has crocodile clamps that can be angled to hold your work in place, leaving both hands free to work.

Before you begin soldering, make sure that your jump ring is spotlessly clean with no grease marks or dust on the surface. Ensure that the seams of the jump ring fit together cleanly. Solder does not fill gaps, so a good tight fit is essential for a quality finish. Make sure the two ends of the jump ring spring together, as you will be using this tension to hold the final shape of the jump ring. If necessary, use a fine jeweller's file to flatten off the ends so that they meet perfectly.

Place the jump ring on the charcoal block or in the ‘helping hands' clips and carefully put a very small amount of flux on the join. Flux is a chemical cleaning agent that removes any silver oxide from the surface of the jump ring and also allows the solder to flow freely when heated. Silver solder is normally sold as a thin sheet of solder that can be cut with jeweller's snips into the right size for each job. Place a small piece of solder on the seam (the flux will also act as a binding agent to hold the solder in place). Once you are happy with the position of the solder, gently apply the heat to the solder, keeping the flame moving rather than focused in one spot so that the solder flows evenly across and into the seam. As soon as the solder liquefies, remove the heat and allow the jump ring to cool. As soon as it is cool, place it in the pickle bath to remove any oxidation. You can then rinse the jump ring in a solution of water and baking soda, which neutralises the acid of the pickle bath, and give it a final polish.

Your jump ring is now ready to use on your final piece and will give you a professional finish and secure fitting for any clasps you wish to add. With practice, silver soldering is easy to master and will raise the standard of your work above the ordinary and into the realms of the professional.

--
Adam Hunter - E-commerce Marketing Manager of cooksongold.com. Cookson Precious Metals offer a choice of jewellery making supplies from over 10,000 products including Sterling silver solder, jewellery tools, precious metal clay, gemstones and gold and silver sheet - gold, platinum and palladium plus technical information for jewellers, jobbers, designer, craftsmen, artisans and students.

Contacts
Adam Hunter
E-commerce Marketing Manager
Tel(DDI): +44 (0) 121 212 6491
E-mail: adam.hunter@cooksongold.com

Source: http://www.articletrader.com ]]> http://www.articletrader.com/home-and-family/hobbies/making-a-swarovski-crystal-bead-bracelet.html http://www.articletrader.com/home-and-family/hobbies/making-a-swarovski-crystal-bead-bracelet.html Thu, 12 Nov 2009 09:03:58 -0600
To create a beautiful Swarovski crystal bead bracelet, you will need a packet of size 15 seed beads, 24 small pearls and 36 small Swarovski crystal beads. Cut a length of beading thread approximately 1.5metres and thread it onto a beading needle. About 15cm from the end, attach a bead stopper. Each bead always has a seed bead either side of the crystal or pearl. So always add on bead "units" for example, one seed beads one crystal (or pearl) then one seed bead, every time you need to add on beads. Thread on four small crystal units: one seed bead, one crystal, one seed bead, four times. Allow the beads to fall down near your bead stopper. Pass needle through the bottom of the first small crystal unit and then pull the thread so the beads form a circle or a square.

Tie a small knot between the seed beads where your needle is and then continue to pass the needle through the next small crystal unit. The needle always comes out of the bottom crystal or pearl unit ready to add the next circle. Add on one small crystal unit, one small pearl unit and one small crystal unit. Pass the needle through the next small crystal unit (on the circle you have just added on) then through small pearl unit. Add on three small pearl units, then pass the needle through the existing small pearl unit on the previous circle, and then pull thread up. You will now have three adjoining circles. Pass the needle through the next two small pearl units. Add on three small crystal units and pass the needle through the small unit from the previous circle. Then repeat the process with the next two small crystal units until you have four adjoining circles. Continue adding on units until you have three complete small pearl unit circles.

You can carry on with this pattern to create an interlinked bracelet of circles, emphasising the Swarovski crystals and creating a glittering effect. If you wish to get a little more adventurous you can add ‘feature beads' onto the design to create a focal point on the bracelet that will draw the eye. But the beauty of Swarovski crystals is their adaptability, versatility and the ease with which they will fit into almost any design you choose. For a very simple but stylish effect, add Swarovski crystals to a simple silver chain to produce a ‘charm bracelet' of crystals. Using a pin style earring wire, thread your crystal onto the wire and bend the end of the wire around a pair of round-nosed pliers to form a loop. Trim the excess wire off with a pair of jeweller's wire-cutters and bend the loop back so that the crystal hangs freely. Attach the crystal to your silver chain and close the loop, soldering the join to be extra sure that your crystal doesn't come off too easily. By spacing a variety of Swarovski crystals around the bracelet you can achieve the look you want. The beauty of this simple design is that when you grow bored of the colours you can simply remove the crystals and replace them with new ones to suit your mood or this season's latest fashion colours. Swarovski crystal beads are fun, versatile and beautiful and make the perfect addition to almost any jewellery design.

--
Adam Hunter - E-commerce Marketing Manager of cooksongold.com. Cookson Precious Metals offer a choice of jewellery making supplies from over 10,000 products including all types of Swarovski crystal beads. Other items include - jewellery tools, precious metal clay, gemstones and gold and silver sheet - gold, platinum and palladium plus technical information for jewellers, jobbers, designer, craftsmen, artisans and students.

Contacts
Adam Hunter
E-commerce Marketing Manager
Tel(DDI): +44 (0) 121 212 6491
E-mail: adam.hunter@cooksongold.com

Source: http://www.articletrader.com ]]> http://www.articletrader.com/home-and-family/hobbies/how-to-make-a-silver-clay-ring-using-precious-metal-clay.html http://www.articletrader.com/home-and-family/hobbies/how-to-make-a-silver-clay-ring-using-precious-metal-clay.html Thu, 12 Nov 2009 08:47:53 -0600
Ideal for almost any application, silver clay (PMC is also available in gold) is an ideal way to make intricate silver findings, silver beads or even silver rings. Making a clasp finding or ring is basically the same process and involves some specialist equipment, but nothing that is beyond the reach of most competent hobby jewellery makers. Modern silver clay can be fired in a conventional oven, although if you are serious about using PMC in your jewellery making it may be wise to invest in a small kiln where the firing temperature can be more accurately controlled. Firing temperature for the clay is around 1500 degrees F and takes around 10 minutes depending on the nature of the clay and the design. Although precious metal clay does still suffer from a certain degree of shrinkage once fired, the modern versions of PMC are far less prone to this problem than the earlier forms of the clay. If you are working with smaller pieces, a kiln or oven can be replaced with a jeweller's gas torch and the heat applied directly to the clay to achieve the same result.

Because of its malleable properties, precious metal clay is ideal for making patterned objects that would otherwise require casting or engraving to achieve the same effect. The clay takes a ‘transfer' pattern extremely well - by simply pressing a patterned surface into the clay a unique texture can be achieved, even on the smallest of PMC beads or silver findings. Once fired, the final piece can be polished and because the binding agents burn off in the firing process, the resulting piece is almost pure silver and can be finished in exactly the same way as any other piece of silver jewellery.

Making a silver ring or finding is simplicity itself. Once you have the correct size of the ring you wish to make (remembering to allow at least 10% shrinkage in your final piece), a simple loop of clay can be formed around a ring mandrel. A useful tip is to wrap a self-adhesive note around the mandrel and place a tiny amount of oil on the surface to stop the clay sticking to the mandrel. Form your ring from a rolled-out length of clay approximately 1mm thick and wrap it around the mandrel, joining the two ends together carefully to ensure that there is no obvious join. Allow the ring to dry naturally and remove it from the mandrel once it feels dry and firm. You can now use fine jeweller's files to smooth any rough edges and shape your ring. Place the ring on a heat resistant surface and apply the heat from the lit torch. The ring will begin to discolour and produce a small flame after about 30 seconds. Continue to fire the clay until the ring gives off a slight orange glow. This should take between three and five minutes. Once this point is reached, remove the heat and pick the ring up with tweezers and very carefully submerse it in cool water.

Once the ring is completely cool, it can be cleaned with a stainless steel brush until the white residue has been removed and a shiny surface is achieved. Your PMC ring can now be used in your final jewellery design.

Precious metal clay is simple to use and opens up a world of possibilities in jewellery making. It is no surprise that the popularity of this adaptable material continues to grow.

--
Adam Hunter - E-commerce Marketing Manager of cooksongold.com. Cookson Precious Metals offer a choice of jewellery making supplies from over 10,000 products including all types of precious metal clay (PMC) - art clay and silver clay. Other items include - jewellery tools, precious metal clay, gemstones and gold and silver sheet - gold, platinum and palladium plus technical information for jewellers, jobbers, designer, craftsmen, artisans and students.

Contacts
Adam Hunter
E-commerce Marketing Manager
Tel(DDI): +44 (0) 121 212 6491
E-mail: adam.hunter@cooksongold.com

Source: http://www.articletrader.com ]]> http://www.articletrader.com/home-and-family/hobbies/license-plate-frames-affordable-christmas-gifts.html http://www.articletrader.com/home-and-family/hobbies/license-plate-frames-affordable-christmas-gifts.html Tue, 10 Nov 2009 12:26:44 -0600
License plate frames make such fun gifts. Pricing ranges from about $15 to $80. You can get a license plate frame personalized with whatevery you'd like for just $15. That's a great deal. Everyone loves getting gifts that fit their personality. A car accessory is a gift idea that works for everyone since most everyone has their own car.

Some of my absolute favorite phrases of all time for license plate frames are as follows:

1. Not all dumbs are blonde
2. I think therefore I'm confused
3. In this jungle a girl needs her jeep
4. I'm a beautician not a magician
5. God loves you and I'm trying
6. My grandkids are cuter than yours
7. My dogs are cuter than your grandkids
8. 0 to bitch in 3.5 seconds
9. My other ride is a broom
10. When in need dial 1-800-DAD-CASH
11. She who dies with the most shoes wins
12. My parents think I'm still in college
13. If a cop didn't see it, I didn't do it
14. Sometimes I go topless
15. He bought it, I got it
16. His and hers. Her car, his payment
17. Happiness is yelling bingo
18. Everyone is entitled to my opinion
19. Back off. I'm a postal worker
20. Wrangler butts drive me nuts

Anyhow, you get the idea. Come up with your own funny saying or idea and put it on a license plate frame. Great for gag gifts too. License plate frames usually take about a week to personalize and then they ship. So, don't procrastinate if you want a personalized license plate frame under that Christmas tree.

--
Gunther Gifts has been online since 1999. License plate frames and personalized gifts are offered at discount pricing. 100,000's of customers served. Trust the experts for your engraved gift needs.

Source: http://www.articletrader.com ]]> http://www.articletrader.com/home-and-family/hobbies/how-to-get-custom-handmade-jewelry-bracelets.html http://www.articletrader.com/home-and-family/hobbies/how-to-get-custom-handmade-jewelry-bracelets.html Fri, 02 Oct 2009 17:31:47 -0500
First of all, it is a great idea to get a consultation of an expert in the field of precious metals and stones. He will not only share some general information with you but will help in the evaluation of the stones and metals cost and authenticity. You shouldn't forget that now there are lots of imitation articles on the marketplace. If an expert is your friend he will easily create the best design of the jewelry item. Otherwise it's sensible to explain your preferences to him, and to describe your character. All this info will help the expert to select a suitable design.
Make certain that the precious stone for your piece of jewelry matches the metal you have chosen and the design you are planning. It is also possible to incorporate a photograph of your partner in jewelry instead of the gem stone. In the majority of cases photographs are framed in pendants and brooches.

Making a custom piece of jewelry offers rich possibilities in the selection of gemstones that are the most suitable for you. To get a really non-typical adornment you would better select the rarest gem stone available on the market. So do not be in a hurry while choosing the stone. The time spent on looking for the best gem will bring you a perfect piece of jewelry created especially for you. While planning custom jewelry as a present for the person you love make sure you have at least 1 month at your disposal.
One of the most widespread custom pieces of jewelry production is a bracelet. A custom bracelet is as a rule a special one as it has the name of its owner printed on it. If you desire to make your custom bracelet a true piece of art, mount various gems between the letters of your name. Custom bracelets are also popular amid philanthropic organizations as a tool to increase the popularity of their activities.
When planning the design of your jewelry item pay attention to basic ideas of various cultures and epochs. As far as you know, Antiquity and Renaissance are famed for their fine pieces of art, so you may find a source of inspiration in their culture.
Take the creation of your jewelry item serious and you will get an individual and very beautiful adornment in the end.

--
Do you dream to be distinguished amongst other people? It's not a problem nowadays! Order custom silver jewelry necklaces and they will help you to become notable in the crowd.

Source: http://www.articletrader.com ]]> http://www.articletrader.com/home-and-family/hobbies/making-charms-using-swarovski-crystal-beads.html http://www.articletrader.com/home-and-family/hobbies/making-charms-using-swarovski-crystal-beads.html Mon, 14 Sep 2009 13:41:58 -0500
In order to create a crystal that allows light to refract in a rainbow spectrum, Swarovski crystal beads are coated with special metallic chemical coatings. Aurora Borealis is one of the most popular coatings and gives the surface a rainbow oil slick appearance. This makes Swarovski crystal beads a perfect accompaniment to any type of finding as the beads catch the light and really do sparkle with an iridescent shimmer. They are particularly popular used as charms and are incredibly easy to incorporate into even the most simple of designs.

To make your own charms using Swarovski crystal beads, you only need the most basic of jewellery making equipment. And you don't necessarily have to use them to make jewellery either - they can also be used to add a special sparkle to clothes or even mobile phone covers. All you need to make simple charms are a pair of round nose pliers, flush cutting pliers, a selection of crystal beads and perhaps some accent beads to add a flourish to the design, silver or gold jump rings and silver or gold eye or head pins. Decide on the design you'd like to create using a combination of Swarovski crystals and accent beads. String the beads onto a silver or gold head or eye pin, depending on your design. Leave enough length at the end of the pin so that you can make a loop for hanging and use the flush cutters to trim any excess wire from the end of the pin.

Use the round nose pliers to bend the remaining wire into a loop to finish off the charm. The smoother the loop, the better and stronger the charm will be. If you're able to solder skilfully you can give a more professional finish by soldering the join in the loop to secure your charm properly. Once you have several charms you can then string them together to make a ‘cluster effect' necklace or sew them onto a jumper or cardigan to give it a new lease of life and added sparkle. Swarovski crystals are incredibly easy to use and look stunning for very little cost.

Good suppliers of crystals will carry a wide selection of colours and effects and the crystals have become so popular that there are even artists creating large sculptures incorporating the iridescence and shimmer of these simple but beautiful beads into their work. They are particularly good for children's jewellery projects as the bright colours and tactile nature of the crystals appeals to younger jewellery enthusiasts. The best way to discover the nature of these crystal beads is to buy a bag and just sit down and create your own designs with them. The only thing that limits you is your own imagination, so let it run wild and see what happens!

--
Adam Hunter - E-commerce Marketing Manager of cooksongold.com. Cookson Precious Metals offer a choice of jewellery making supplies from over 10,000 products including Swarovski crystal beads, jewellery tools, precious metal clay, gemstones and gold and silver sheet - gold, platinum and palladium plus technical information for jewellers, jobbers, designer, craftsmen, artisans and students.

Contacts
Adam Hunter
E-commerce Marketing Manager
Tel(DDI): +44 (0) 121 212 6491
E-mail: adam.hunter@cooksongold.com

Source: http://www.articletrader.com ]]> http://www.articletrader.com/home-and-family/hobbies/places-to-walk-the-cheviot-hills-and-the-cheviots-challenge.html http://www.articletrader.com/home-and-family/hobbies/places-to-walk-the-cheviot-hills-and-the-cheviots-challenge.html Thu, 03 Sep 2009 09:59:06 -0500
The short route is 15 miles and the long route is 25 miles, with 2000 feet and 4000 feet of climbing, respectively. They both start and end at Alwinton and include Bloodybush Edge. You have to go through checkpoints to show that you have completed areas of the course and you need to get through them by closing time. They can also provide you with First Aid if you need it, and you'll get a souvenir mug and a certificate of completion at the finish.

As part of Northumberland National Park, the Cheviot Hills are a great destination. There are picnic opportunities, a lot of places to walk, and rivers that you can paddle a small boat in or just swim and play in. There's something for just about everyone to do there. You can see archeological digs, you can get ice cream, and there are always new and interesting things to learn about the park and about other parks in the area that you might want to visit in your travels, as well. The Cheviot Hills are distinct because they're very rounded, and they were formed by lava. Mountain bikers can follow the bridleways that criss-cross the mountains and see the routes that ancient cattle drovers took.

There are also waterfalls to be enjoyed and the summit shows a great view of the surrounding area. Anyone who likes to walk or bike, and anyone who likes to see the countryside and look at nature should find that the Cheviot Hills is a great spot. Even if you're not interested in the Cheviots Challenge, you can still really enjoy the beauty of the area and all it has to offer.


--
This article was written by Tom Sangers on behalf of Northumberland Cottages who offer Northumberland Accommodation

Source: http://www.articletrader.com ]]> http://www.articletrader.com/home-and-family/hobbies/the-best-family-cycle-trails-in-pembrokeshire.html http://www.articletrader.com/home-and-family/hobbies/the-best-family-cycle-trails-in-pembrokeshire.html Thu, 27 Aug 2009 10:15:22 -0500
In between the two extremes there are also a lot of trails that you can enjoy whether you're experienced or not, and the nice mix of trails is one of the things that people really like about the Pembrokeshire area. If you're planning on cycling in Pembrokeshire with your family you should also take into account the time of year. You don't want to go when the weather is very cold, but you might want to avoid the really hot time of year, as well. It's also important to remember that there will be rainy periods, and it's not nearly as much fun to cycle in the rain. Some of the trails can get slick when it's rainy, and there is a higher potential for people to be injured that way. Know the trails that you're going to be riding, and make sure that you have a way to communicate with the other cyclists in your family. Don't get separated, and know how to get help just in case someone becomes sick or gets injured. If you know what you need to do in an emergency and you're familiar with the trail you'll be cycling on, you'll have a lot more peace of mind.


--
This article was written on behalf of Celtic Haven Pembrokeshire Cottages which make ideal accommodation for a Short Break Wales

Source: http://www.articletrader.com ]]> http://www.articletrader.com/home-and-family/hobbies/maloof-beyond-90-an-american-woodworker.html http://www.articletrader.com/home-and-family/hobbies/maloof-beyond-90-an-american-woodworker.html Fri, 14 Aug 2009 16:49:32 -0500
For Gene Sasse, author of Maloof Beyond 90 - An American Woodworker (www.sassebooks.com), a typical hardcover or paperback just wouldn't do. That's why his book is a beautifully handcrafted collection of original artwork, bound in European leather and reflecting the soul of the gentleman whose work it chronicles.

The book is a handmade edition containing original images of the work of the celebrated woodworker, Sam Maloof. Heralded as a "prominent leader in the California modern arts movement", Maloof's works have been exhibited in The Museum of Fine Arts in Boston and the Metropolitan Museum of Art among many other prominent museums. The book is a poetic collection of photographs and narratives of Maloof, his work and his life. The book is tragically more relevant today with the passing of Maloof in Mid-May 2009.

"A man who works with his hands is a laborer," said Sasse. "A man who works with his brains and his hands is a craftsman; but a man who works with his hands and his brain and his heart is an artist."

The book begins with a brief biography, introducing the reader to the life of Sam Maloof. His story opens with his parent's humble beginnings in Lebanon, through their move to Chino, California, where they sold dry goods, hand made lace embroidered linens and crochet work from a horse and cart.

Sam's interest and admiration in his mother's fine needle work were an inspiration to him, according to Sasse. By high school, Sam had found employment and recognition for his calligraphy and cartooning abilities, and dreamed of becoming a Disney animator. In his twenties, Maloof found himself working for famed California artist, Millard Sheets, who helped to mature and expand his outlook on the world of art. At the age of 34, Maloof built a small studio and began to work for himself.

In a short time, he was making a modest living and was being featured in magazines and having his work commissioned. Several years later, Maloof's furniture began to be exhibited in museums. Little did he know he was on his way to greatness. When Maloof's handcrafted home was set to be demolished to make room for a highway, the state legislature declared him a "national treasure" and his home was moved to a new site.

The poetic descriptions of Maloof's work and of the man himself are inspiring to read. He was greatly admired by many people, including several Presidents of the United States.

"I consider Sam Maloof to be the world's finest woodworker. His integrity and personal philosophy are demonstrated vividly in the design and beauty of his exquisite furniture," wrote former President Jimmy Carter in his introduction to the book. "Sam has touched the hearts and lives of countless people with his extraordinary talent and skills as a teacher and role model, so his legacy will survive for generations to come."

The book would not be complete without some of Maloof's own musings about his work.

"The rewards of woodworking are not monetary," he said. "It is a long road. But there is basic, deep emotional satisfaction as well as a spiritual satisfaction that comes from working with your hands."

Maloof Beyond 90 is a work of art, much in keeping with the craftsmanship of Sam Maloof's pieces. The loving detail put into this book makes it a collector's dream. The detailed photographs depicting Maloof's work are beautifully rendered. Anyone with an interest in arts and crafts will enjoy Maloof Beyond 90.

--
Gene Sasse is a renowned photographer and friend to Sam Maloof. He believes "a great photograph transcends language barriers." He has been featured in many design annuals, and magazines such as American Style Magazine Oct 2006, Art & Antiques Magazine April 2007, Western Art & Architecture Magazine Fall - Winter 2008/2009, as well as his book Garden Thoughts - Photographs, Quotes & Inspiration for the Gardener. He currently lives in Southern California.

Source: http://www.articletrader.com ]]>