The Right Tips For A Perfectly Ironed Lab Coats

If you are in a hurry, you can dramatically cut down your ironing time by using aluminum foil. Place it under the ironing board cover so that it can reflect the heat from the iron back to the underside of the lab coat. This way, you are ironing both sides of the coat at the same time. This is just one of the things you have to remember when ironing your lab coat.

Keeping your lab coat free from wrinkles is not exactly a very hard task. You just have to send it to the cleaners and you can be assured that they will have your coat pressed properly and ready to be worn again to work. But what if you have to iron your own lab coat? That would be the time when you have to take matters into your own hand and just iron the lab coat on your own.

If you really have to iron your own lab coat, there are simple things that you should remember so that your ironing experience will not be all that bad. In fact, these simple tips could help you make ironing easy. The first tip is to do it in your bedroom. The advantage of ironing in the bedroom is that you can use the bed to sort your lab coats. This is especially true if you are going to iron lab coats with other clothes like medical scrubs.

The correct way to iron is to push the ironed parts of the lab coat away from you. This way, you can reduce the risk of getting the ironed part wrinkled again. Make sure that the floor is clean as the lab coat might be dirtied if the floor is not clean. As much as possible though, maneuver the coat so that it will not touch the floor.

You might be ironing lab coats made of different clothing materials. If that's the case, begin with the lab coat with the lowest temperature requirement. Gradually increase the temperature of the electric iron while you go through more lab coats which is easier than letting the iron cool down which could take a long time.

Use a sleeve board when ironing the sleeves so that no creases will be formed. If you don't have one, you can use a rolled-up towel. Place it inside the sleeve and iron gently. If you want a starched lab coat, you can make the solution at home by combining 1 tablespoon of cornstarch and 2 cups of water. Stir vigorously until cornstarch is completely dissolved. Put it in a clean spray bottle and you are ready to go.